Produktinformationen "Icom IC-A5 Flugfunk Handfunkgerät 5 Watt Sendeleistung"
Full 5 Watt output power
All 760 channels (118.000 MHz - 136.975 MHz)
25 kHz tuning steps
200 memory channels with 6 character names
PC programmable functions and memory channels
Measuring only 2 9/32(W) X 4 7/32(H) X 1 1/8(D) in., it is nearly half the size of the IC-A3, and another third as small as the IC-A21. Yet, it is every inch an Icom, chock full of the useful features you've come to rely on. Its palm size is very convenient for carrying on your belt with the supplied belt clip.
Well labeled and well spaced keys are easy to operate, even while wearing gloves. The back mounted battery puts the weight of the unit in your palm, allowing a comfortable grip. The wide and large LCD lets you see every readout at a glance.
Volume and channel selection can be controlled by the rotary selector on the top panel, or Up/Down switches on the front. You can change the assignment at your convenience. The volume level and channel number are displayed during adjustment.
Received conversation can be recorded and played back with the built-in voice recorder. Recorded contents can be transmitted and kept even with power off, or when the battery is discharged.
The IC-A5 has water resistant construction, equivalent to JIS-4 grade, which allows safe operation in rainy conditions.
One touch access to 121.5 MHz emergency channel
Large capacity Ni-MH battery pack
NOAA weather channels
Innovative "TAG" scanning and memory bank scanning
ANL (Auto Noise Limiter) for noise reduction
Low battery alert
Backlit display and keypad for night operation
This information is taken directly off of the Icom IC-A5 brochure.
Tx/Rx: 118.000-136.975 MHz
Rx: 161.650-163.275 MHz (weather channels)
Tx/Rx: AM (6K00A3E)
Rx: FM (16K0G3E)
Channel spacing: 25 kHz
No. of memory Ch.: 200 (20 Channels X 10 banks)
Power supply requirement: 9.6 V - 12.0 V DC (9.6 V standard)
Current drain (at 13.75 V DC, typical):
Tx: 1.8 A (at max. power)
Rx: 500 mA (at max. audio)
Rx: 70 mA (at stand-by)
Operating Temperature Range: -10°C to +60°C; -14°F to +140°F
Frequency stability: ±17 ppm (-10°C to +60°C)
Dimensions (projections not included)
58(W) x 107(H) x 28.5(D) mm
2 9/32(W) x 4 7/32(H) x 1 1/8(D) in
Weight (with BP-200L and antenna): 340 g; 12 oz
Antenna connector: BNC type
Output power (at 9.6 V)
5.0 W typ. (PEP)
1.5 W typ. (carrier)
Modulation system: Low level modulation
Modulation limiting: 70-100%
AF harmonic distortion: Less than 10% (at 60% mod.)
Hum and noise ratio: More than 35 dB
Spurious emissions: Less than -60 dB
Microphone impedance: 150 ohms
Receiving system: Double conversion super-heterodyne
1st: 30.05 MHz
2nd: 450 kHz
AM: Less than 1.0 µV (at 6 dB S/N)
FM: Less than 1.0 µV (at 12 dB SINAD)
More than 7.5 kHz/-6 dB
Less than 25 kHz/-60 dB
Hum and noise ratio: More than 25 dB
Spurious response rejection ratio: More than 60 dB
Audio output power (at 9.6 V DC): More than 500 mW with an 8 ohm load
Wall charger *
Battery pack *
* depending on version
BP-200L Ni-MH BATTERY PACK
9.6 V, 760 mAh rechargeable battery pack provides 6 hours of operation (at a duty cycle of 5:5:90 / Tx:Rx:stand-by). Same as supplied with the transceiver (not supplied with some versions).
Chargers and cables
BC-119 DESKTOP CHARGER
+ AD-87 desktop charger adapter + AD-88 connection board. For rapid charging of a battery pack. An AC adaptor and AD-88 may be supplied depending on version. The Ad-87 is sold separately. Charging time: 1 to 1.5 hrs.
+ AD-87 desktop charger adapter + AD-88 connection board. For rapid charging of up to 6 battery packs. Six AD-87's and AD-88's sold separately. Charging time: 1 to 1.5 hrs.
BC-124 AC ADAPTER
Used for BC-121. Output voltage/current: 12 V / 7 A
BC-110A/D/V WALL CHARGER
Regularly charges the BP-200L in approx. 15 hrs. Same as supplied with the transceiver.
CP-12L CIGARETTE LIGHTER CABLE WITH NOISE FILTER
For operation and charging with a 12 V cigarette lighter socket.
OPC-254L DC POWER CABLE
For operation and charging from a DC power supply.
LC-147 CARRYING CASE
Fits the transceiver with the supplied battery pack
MB-76 BELT CLIP
Attaches the transceiver to the belt. Same as supplied with the transceiver.
OPC-967 HEADSET ADAPTER CABLE
Allows work with most aviation headsets. Provides the side tone function. Some versions already contain this as an accessory.
Same as supplied with the transceiver